Bently Nevada 3500/15 127610-01 AC/DC POWER SUPPLY
ICS TRIPLEX T8830 Trusted 40 Channel Analogue Input FTA All in stock new original guarantee
Dec 2025 17
2025-07-29
Nov 2024 07
IS420UCPAH2A-C
Mark* VIe UCPA Controller with Integral I/O
Condition: New and original
Lead time : 3-7 days
Warranty :12 monthes
item no.:
IS420UCPAH2A-Clead time:
IN STOCKproduct orgin:
USAbrand:
General Electricshipping port:
XIAMENpayment:
TTmarket price:
$999
IS420UCPAH2A-C
Mark* VIe UCPA Controller with Integral I/O
Question：Is it a multi-function module?
Answer：Yes，The controller has both integral I/O capabilities and can communicate with external I/O packs through a simplex IONet. The UCPA Mark VIe controller is commercial in design and not intended for use at any time in a residential environment. The UCPA controller is panel-mounted and includes the following features:
• Controller and I/O in a single module
− Smaller panel footprint with integral I/O
− IONet port for simplex I/O module expansion
• Single 12 V dc power supply, runs at 4 W (low power)
• Can operate in -40 to 70°C ambient temperate range
• No battery or fan
• Cost-effective platform for simplex control and I/O
• Uses ControlST* V05.04 or later with the same ToolboxST* configuration tools
across the Mark Controls platform.
UCPA Performance and Limitations
The UCPA is designed for simplex unit controls with integral I/O capability, a smaller footprint, and can operate in -40 to 70°C ambient temperature range. BPPC processor speed and amount of RAM are the limiting factors. UCPA has approximately 25% the memory of UCSB. Be aware, however, that the internal UCPA processor and memory do have the following limitations as compared to the UCSB controller:
• UCPA performance as relative to the UCSBH4A (1066MHz Intel® processor) is approximately 15% capability.
• UCPA performance as relative to the UCSBH1A (600 MHz Intel processor) is approximately 25% capability.
• UCPA cannot be part of a Shared IONet system.
• UCPA does not support OPC UA direct from the controller.
• UCPA can only support a maximum of six simplex distributed I/O packs over IONet with a minimum frame period of 20 ms.
• UCPA does not have a real-time clock, which is needed to fully support the SecurityST server.
• Foundation Fieldbus is not supported with UCPA.
Related model number:
IS220PDIOH1A
IS220PVIBH1A
IC693MDL645
IS220PSCHH1A
IS220PAICH1B
IS220PDIAH1A
IS220PTURH1A
IS220PRTDH1B
IS220YSILS1B
IS220PVIBH1A
IS220PPRFH1A
IS220PDOAH1B
IS220PPROS1B
IS220UCSAH1A
IC752SPL013
MPU55
MPU50
IC690RBT001A
IS220PTCCH1B
IS220PDIOH1B
IS215ACLEH1CA
DS200DSPCH1ADA(DS200ADMAH1AAC) 1
IS200EXHSG3A
DS200SDC1G1A
IS230PCAAH1A
IS420UCSCH1B
IS210AEBIH1B
IS210MACCH2AEGIS210MACCH1AKH(IS200WEMDH1ABA）IS220PTURH1A
IS220PTURH1B
GE 531X135PRGALM1 new and original package with one year warranty
GE DS200FSAAG1A Power Regulating Circuit Card
GE DS200SHVMG1A SCR High Voltage Interface Board Basic Attribute: Manufactured by General Electric (GE), this is a high-voltage monitoring and protection board belonging to the Mark V series. Originating from the United States, it serves as a core safety module for gas/steam turbine control systems, specifically designed to integrate seamlessly wit1
GE IS220PPDAH1A PDM Diagnostic Module
GE IS200JPDSGLA PWR DISTRIBUTION CARD
GE IS220UCSAH1A STAND ALONE MODULE GE PROCESSOR BOARD MARK VI 1. Product Classification & Affiliation IS220UCSAH1A is a key printed circuit board (PCB) developed by General Electric (GE), and it belongs to the product lineup of GE’s Mark VIe Turbine Control System—a high-performance, industrial-grade control platform widely used 1
Customer Satisfaction
Please don’t hesitate to contact us if you have any questions or concerns before or after your purchase. We are committed to your 100% satisfaction.
Guarantee & Returns
1. All products we sell are 100% New original Package.in good condition and will be examed before they are shipped. We will try our best to avoid any quality problems.
2. We offer 12 month warranty after receiving parcels. If there are some workmanship or material defects with the products, please contact us firstly, we will exchange it or offer other solutions for you to make a choice.
3. The shipping and handling charge is not refundable and customer should be responsible for all the charges of unreasonable returning and reshipping. All return items must be in good condition. They must under resalable condition. Man-made defects are not guaranteed, such as broken, scratched and so on. Thanks for understanding and cooperation!
All products we sell are 100% New original Package in good condition and will be examed before they are shipped.
Room 1904, No.96-2 Lujiang Road, Siming District, Xiamen (Building B of Diamond Coast)
Please read on, stay posted, subscribe, and we welcome you to tell us what you think.
008618150137569
0086 18150137569
sales23@htechplc.com