Bently Nevada 3500/15 127610-01 AC/DC POWER SUPPLY
ICS TRIPLEX T8830 Trusted 40 Channel Analogue Input FTA All in stock new original guarantee
Dec 2025 17
2025-07-29
Nov 2024 07
| Manufacturer | GE |
| Series |
Mark VI |
| Short Description |
Trip Emergency Terminal Card |
|
Origin |
US |
|
HS Code |
IS200TREGH2B |
| Operating temperature |
-25°C to +70°C (industrial wide temperature range) |
| Packing Weight | 450g |
| Condition |
In Stock New & Original |
| Lead Time |
3-7 days |
|
Warranty |
12 monthes |
| Courier | Fedex/DHL/Your forwarder |
| Payment | T/T Multiple Currency Prepayment acceptable |
| Document | Available |
brand:
General ElectricGE IS200TREGH2B
Trip Emergency Terminal Card
IS200TREGH2B is a dedicated terminal board for General Electric (GE) Mark VI series industrial control systems, designed for gas turbine emergency trip protection. The module controls three emergency trip solenoid valves through 12 sets of redundant relays (6 sets each for main and backup), with a rated voltage of 24VDC, an operating temperature range of -40°C to +85°C, IP20 protection level and UL/CE/ATEX certification, and supports DIN rail installation. It is widely used in key equipment safety protection systems in the fields of power, petrochemical, etc.
Input typeBasic parameters
Product model: IS200TREGH2B (GE Mark VI series component)
Rated voltage: 24VDC ±10% (typical industrial control voltage)
Maximum load current: 5A/channel (relay contact capacity)
Relay configuration
Number of relays: 12 (6 main + 6 standby redundant design)
Contact type: silver alloy contact (10^6 mechanical life)
Response time: <10ms (typical value of mechanical relay)
Environmental adaptability
Operating temperature: -40°C ~ +85°C (compliant with IEC 60068-2 standard)
Protection level: IP20 (installation requirements in control cabinet)
Safety certification: UL 508 / CE / ATEX Zone 2 (hazardous area certification)
Interface characteristics
Control signal: optocoupler isolated digital input (24VDC level)
Status feedback: dry contact signal output
Mechanical characteristics
Installation method: DIN rail installation (compliant with EN 60715 Standard)
Dimensions: 200mm(W) × 120mm(H) × 60mm(D) (including terminal block)
Additional shielding measures are required in strong electromagnetic environments
Key Features Analysis
Redundant Power Supply Architecture
Dual power input design (main/backup), hot-swap switching supported
Each solenoid valve drive circuit contains 2 sets of independent relay contacts in parallel
Safety interlock mechanism
Built-in Watchdog circuit (500ms timeout detection)
Possess contact welding detection function (monitored by auxiliary contacts)
Diagnostic function
LED status indication (power/fault/action status)
Support MODBUS RTU protocol communication (through expansion module)
Application Restriction Description
Solenoid valve drive circuit needs to be configured with 1A fast-blow fuse (user side)
It is recommended to use with GE DS200 series I/O controller
It is forbidden to use in areas with an altitude of more than 2000m (requires capacity reduction)
Related :
IS200TREGH2B
IS200TRPGH1B
IS200TTURH1C
All GE products should be available in our expanded inventory, welcome to inquire:
sales23@htechplc.com
Kelly wang
+86 18150137569
GE 531X135PRGALM1 new and original package with one year warranty
GE DS200FSAAG1A Power Regulating Circuit Card
GE DS200SHVMG1A SCR High Voltage Interface Board Basic Attribute: Manufactured by General Electric (GE), this is a high-voltage monitoring and protection board belonging to the Mark V series. Originating from the United States, it serves as a core safety module for gas/steam turbine control systems, specifically designed to integrate seamlessly wit1
GE IS220PPDAH1A PDM Diagnostic Module
GE IS200JPDSGLA PWR DISTRIBUTION CARD
GE IS220UCSAH1A STAND ALONE MODULE GE PROCESSOR BOARD MARK VI 1. Product Classification & Affiliation IS220UCSAH1A is a key printed circuit board (PCB) developed by General Electric (GE), and it belongs to the product lineup of GE’s Mark VIe Turbine Control System—a high-performance, industrial-grade control platform widely used 1
Customer Satisfaction
Please don’t hesitate to contact us if you have any questions or concerns before or after your purchase. We are committed to your 100% satisfaction.
Guarantee & Returns
1. All products we sell are 100% New original Package.in good condition and will be examed before they are shipped. We will try our best to avoid any quality problems.
2. We offer 12 month warranty after receiving parcels. If there are some workmanship or material defects with the products, please contact us firstly, we will exchange it or offer other solutions for you to make a choice.
3. The shipping and handling charge is not refundable and customer should be responsible for all the charges of unreasonable returning and reshipping. All return items must be in good condition. They must under resalable condition. Man-made defects are not guaranteed, such as broken, scratched and so on. Thanks for understanding and cooperation!
All products we sell are 100% New original Package in good condition and will be examed before they are shipped.
Room 1904, No.96-2 Lujiang Road, Siming District, Xiamen (Building B of Diamond Coast)
Please read on, stay posted, subscribe, and we welcome you to tell us what you think.
008618150137569
0086 18150137569
sales23@htechplc.com