Bently Nevada 3500/15 127610-01 AC/DC POWER SUPPLY
ICS TRIPLEX T8830 Trusted 40 Channel Analogue Input FTA All in stock new original guarantee
Dec 2025 17
2025-07-29
Nov 2024 07
| Manufacturer | GE |
| Series |
Mark VI |
| Short Description |
Analog Input Terminal Board |
|
Origin |
US |
|
HS Code |
IS200TBAIH1C |
| Operating temperature |
-25°C to +70°C (industrial wide temperature range) |
| Packing Weight | 450g |
| Condition |
In Stock New & Original |
| Lead Time |
3-7 days |
|
Warranty |
12 monthes |
| Courier | Fedex/DHL/Your forwarder |
| Payment | T/T Multiple Currency Prepayment acceptable |
| Document | Available |
brand:
General ElectricGE IS200TBAIH1C
Analog Input Terminal Board
IS200TBAIH1C is an analog input terminal board for General Electric's Mark VI series industrial control systems. It supports 16 differential signal inputs (±10V/4-20mA), uses a 16-bit high-precision ADC, has an operating voltage of 24VDC±10%, and channel isolation of 1500Vrms. It is suitable for gas turbine control, has an operating temperature of -25℃ to +70℃, communicates with the system through the VME bus, has multi-channel status indicators, and must be used with the Mark VI framework.
Basic parameters
Input type
Supports 16 differential analog inputs
Compatible signal range: 4-20mA (configurable by jumper)
Resolution and accuracy: 16-bit high-precision ADC conversion
Typical accuracy: ±0.05% (full scale)
Sampling rate
Maximum sampling frequency: 1kHz (multi-channel polling mode)
Electrical characteristics
Operating voltage: 24VDC±10%
Power consumption: 5W (full load)
Isolation voltage: 1500Vrms
Environmental adaptability
Operating temperature: −25℃ +70℃
Storage temperature: −40℃ +85℃
Protection level: IP20 (dustproof but not waterproof)
Interface and communication
Backplane interface: VME bus compatible
Communication protocol: Supports Mark VI system-specific control protocol
LED status indication: Independent operation/fault indicator for each channel
Physical specifications
Dimensions: 233mm×160mm×20mm
Installation method: DIN rail or panel screw fixation
Weight: about 450g
Precautions
Need to cooperate with Mark VI system framework usage
It is recommended to perform zero point/full scale calibration regularly (cycle ≤ 12 months)
Additional shielding measures are required in strong electromagnetic environments
Related :
IS200TREGH2B
IS200TRPGH1B
IS200TTURH1C
All GE products should be available in our expanded inventory, welcome to inquire:
sales23@htechplc.com
Kelly wang
+86 18150137569
GE 531X135PRGALM1 new and original package with one year warranty
GE DS200FSAAG1A Power Regulating Circuit Card
GE DS200SHVMG1A SCR High Voltage Interface Board Basic Attribute: Manufactured by General Electric (GE), this is a high-voltage monitoring and protection board belonging to the Mark V series. Originating from the United States, it serves as a core safety module for gas/steam turbine control systems, specifically designed to integrate seamlessly wit1
GE IS220PPDAH1A PDM Diagnostic Module
GE IS200JPDSGLA PWR DISTRIBUTION CARD
GE IS220UCSAH1A STAND ALONE MODULE GE PROCESSOR BOARD MARK VI 1. Product Classification & Affiliation IS220UCSAH1A is a key printed circuit board (PCB) developed by General Electric (GE), and it belongs to the product lineup of GE’s Mark VIe Turbine Control System—a high-performance, industrial-grade control platform widely used 1
Customer Satisfaction
Please don’t hesitate to contact us if you have any questions or concerns before or after your purchase. We are committed to your 100% satisfaction.
Guarantee & Returns
1. All products we sell are 100% New original Package.in good condition and will be examed before they are shipped. We will try our best to avoid any quality problems.
2. We offer 12 month warranty after receiving parcels. If there are some workmanship or material defects with the products, please contact us firstly, we will exchange it or offer other solutions for you to make a choice.
3. The shipping and handling charge is not refundable and customer should be responsible for all the charges of unreasonable returning and reshipping. All return items must be in good condition. They must under resalable condition. Man-made defects are not guaranteed, such as broken, scratched and so on. Thanks for understanding and cooperation!
All products we sell are 100% New original Package in good condition and will be examed before they are shipped.
Room 1904, No.96-2 Lujiang Road, Siming District, Xiamen (Building B of Diamond Coast)
Please read on, stay posted, subscribe, and we welcome you to tell us what you think.
008618150137569
0086 18150137569
sales23@htechplc.com