vibration
TSI SYSTEM vibration VM600 IOC4T 200-560-000-111 VIBRO METER I/O Card

products categories

hot products

latest news

VM600 IOC4T 200-560-000-111 VIBRO METER I/O Card


  • product orgin:

    USA

  • brand:

    vibration
  • product details


VM600 IOC4T 200-560-000-111 VIBRO METER I/O Card

  • The IOC4T input /output card acts as a signal interface for the VM600 series MPC4 machinery protection card, from Meggitt’s Vibro-Meter® product line. It is installed in the rear of a VM600 rack and connects directly to the rack backplane via two connectors.
  • Each IOC4T card is associated with a corresponding MPC4 card and is mounted directly behind it in the VM600 rack (ABE04x or ABE056). The IOC4T operates in slave mode and communicates with the MPC4, through connector P2, using an Industry Pack (IP) interface.
  • The front panel of the IOC4T (rear of the VM600 rack) contains terminal strip connectors for wiring to the transmission cables coming from measurement chains (sensors and /or signal conditioners). The screw-terminal connectors are also used to input all signals from and output all signals to any external control system.
  • The IOC4T card protects all inputs and outputs against electromagnetic interference (EMI) and signal surges and also meets electromagnetic compatibility (EMC) standards.
Picture of 200-560-000-111

Related Product,welcome to inquire:

sales23@htechplc.com /+86 18150137569(whatsapp/wechat)

Ms.kelly stand by to quote you !

MPC4 200-510-070-113 MPC4 200-510-078-115
RPS6U 200-582-500-013 RPS6U 200-582-500-021
IOC4T 200-560-000-019 IOC4T 200-560-000-111
RLC16 200-570-000-111 MPC4 200-510-071-113
RPS6U 200-582-300-013 IOC4T 200-560-000-013
CPUM 200-595-067-114 CPUM 200-595-043-114
IOCN 200-566-000-112 RPS6U 200-582-200-021
IOC4T 200-560-000-114 MPC4 200-510-076-114
CPUM 200-595-033-111 RPS6U 200-582-200-013
CPUM 200-595-072-422 RPS6U 200-582-200-011
MPC4 200-510-074-113 MPC4 200-510-070-112
CPUM 200-595-046-114 CPUM 200-595-100-031
MPC4 200-510-074-114 MPC4 200-510-070-113
IOCN 200-566-000-214 RPS6U 200-582-200-122

hot tags : IOC4T 200-560-000-019 IOC4T 200-560-000-114 MPC4 200-510-070-113 RPS6U 200-582-500-013 MPC4 200-510-071-113 IOC4T 200-560-000-013 IOC4T 200-560-000-113 MPC4 200-510-078-115 RPS6U 200-582-500-021 RPS6U 200-582-200-021 IOCN 200-566-000-112 IOC16T 200-565-000-012

Request a free quote

VM600 IOC4T 200-560-000-111 VIBRO METER I/O Card
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

related products

CE680 444-680-000-511

Vibro CE680 444-680-000-511 Vibration Sensor

Vibro CE680 444-680-000-511  Vibration Sensor The technical parameters of the CE680 series products usually include the following aspects: 1. Sensor type Type: Accelerometer Measurement range: Typically ±2g to ±50g 2. Frequency response Frequency range: 1 Hz to 10 kHz 3. Sensitivity Sensitivity: Typically between 100 mV/g and 10 mV/g 4. Output1

Vibro-Meter VMU 100 204-100-000-013 Vibration Monitoring Unit

Vibro-Meter VMU 100 204-100-000-013 Vibration Monitoring Unit

Vibro-Meter VMU 100 204-100-000-013 Vibration Monitoring Unit The VMU100 204-100-000-013 is a fully programmable, single-channel accelerometer monitor based on an integrated microprocessor, designed for reliable condition monitoring of rotating machinery. Housed in a rugged IP65-rated enclosure, the unit provides excellent protection against dust a1

MPC4

VIBRO METER MPC4

VIBRO METER MPC4

IOC 4T

VIBRO METER IOC 4T

VIBRO METER  IOC 4T Input / Output Card Type IOC 4T

RLC 16

VIBRO METER RLC 16

VIBRO METER  RLC 16

Vibro Meter VM600 MPC4 200-510-071-113 Machinery Protection Card

Vibro Meter VM600 MPC4 200-510-071-113 Machinery Protection Card

Vibro Meter VM600 MPC4 200-510-071-113 Machinery Protection Card Meggitt Sensing Systems’ Vibro-Meter® VM600 series machinery protection system (MPS) centers on the MPC4 protection card—this thing’s the backbone of the whole setup, and it’s way more flexible than you might expect. It can handle up to 4 dynamic signal inputs and 2 speed inputs a1

Our Services

Customer Satisfaction
Please don’t hesitate to contact us if you have any questions or concerns before or after your purchase. We are committed to your 100% satisfaction.
Guarantee & Returns
1. All products we sell are 100% New original Package.in good condition and will be examed before they are shipped. We will try our best to avoid any quality problems.
2. We offer 12 month warranty after receiving parcels. If there are some workmanship or material defects with the products, please contact us firstly, we will exchange it or offer other solutions for you to make a choice.
3. The shipping and handling charge is not refundable and customer should be responsible for all the charges of unreasonable returning and reshipping. All return items must be in good condition. They must under resalable condition. Man-made defects are not guaranteed, such as broken, scratched and so on. Thanks for understanding and cooperation!

copyright © 2026 N.S.E.Automation Co.,Ltd..all rights reserved. powered by dyyseo.com .
#

home

#

products

#

news

#

contact

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!