vibration
TSI SYSTEM vibration Vibro Meter RPS6U 200-582-200-013 rack power supplies

Vibro Meter RPS6U 200-582-200-013 rack power supplies

  • product orgin:

    Sweden
  • brand:

    vibration
  • product details


Vibro Meter RPS6U 200-582-200-013 rack power supplies

  • Either one or two VM600Mk2/VM600 RPS6U rack power supplies can be installed in a VM600Mk2/VM600 ABE04x system rack. A rack with one RPS6U power supply (330 W version) supports the power requirements for a full rack of modules (cards) in applications with operating temperatures up to 50°C (122°F).
  • Alternatively, a rack can have two RPS6U power supplies installed in order to either support rack power supply redundancy or in order to supply power to the modules (cards) non-redundantly over a wider range of environmental conditions.
  • A VM600Mk2/VM600 ABE04x system rack with two RPS6U power supplies installed can operate redundantly (that is, with rack power supply redundancy) for a full rack of modules (cards).
  • This means that if one RPS6U fails, the other will provide 100% of the rack’s power requirement so that the rack will continue to operate, thereby increasing the availability of the machinery
  • monitoring system.

Picture of 200-582-200-013

Related Product,welcome to inquire:

sales23@htechplc.com /+86 18150137569(whatsapp/wechat)

Ms.kelly stand by to quote you !

MPC4 200-510-078-115 RPS6U 200-582-500-013
RPS6U 200-582-500-021 IOC4T 200-560-000-019
IOC4T 200-560-000-111 RLC16 200-570-000-111
MPC4 200-510-071-113 RPS6U 200-582-300-013
IOC4T 200-560-000-013 RPS6U 200-582-300-013 DC
CPUM 200-595-067-114 CPUM 200-595-043-114
IOCN 200-566-000-112 RPS6U 200-582-200-021
IOC4T 200-560-000-114 MPC4 200-510-076-114
CPUM 200-595-033-111 RPS6U 200-582-200-013
IOC4T 200-560-000-113 CPUM 200-595-072-422
IOC16T 200-565-000-012 RPS6U 200-582-200-011
MPC4 200-510-074-113 MPC4 200-510-070-112
CPUM 200-595-046-114 CPUM 200-595-100-031
MPC4 200-510-074-114 MPC4 200-510-070-113

Request a free quote

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

related products

CE680 444-680-000-511

Vibro CE680 444-680-000-511 Vibration Sensor

Vibro CE680 444-680-000-511  Vibration Sensor The technical parameters of the CE680 series products usually include the following aspects: 1. Sensor type Type: Accelerometer Measurement range: Typically ±2g to ±50g 2. Frequency response Frequency range: 1 Hz to 10 kHz 3. Sensitivity Sensitivity: Typically between 100 mV/g and 10 mV/g 4. Output1

Vibro-Meter VMU 100 204-100-000-013 Vibration Monitoring Unit

Vibro-Meter VMU 100 204-100-000-013 Vibration Monitoring Unit

Vibro-Meter VMU 100 204-100-000-013 Vibration Monitoring Unit The VMU100 204-100-000-013 is a fully programmable, single-channel accelerometer monitor based on an integrated microprocessor, designed for reliable condition monitoring of rotating machinery. Housed in a rugged IP65-rated enclosure, the unit provides excellent protection against dust a1

MPC4

VIBRO METER MPC4

VIBRO METER MPC4

IOC 4T

VIBRO METER IOC 4T

VIBRO METER  IOC 4T Input / Output Card Type IOC 4T

RLC 16

VIBRO METER RLC 16

VIBRO METER  RLC 16

Vibro Meter VM600 MPC4 200-510-071-113 Machinery Protection Card

Vibro Meter VM600 MPC4 200-510-071-113 Machinery Protection Card

Vibro Meter VM600 MPC4 200-510-071-113 Machinery Protection Card Meggitt Sensing Systems’ Vibro-Meter® VM600 series machinery protection system (MPS) centers on the MPC4 protection card—this thing’s the backbone of the whole setup, and it’s way more flexible than you might expect. It can handle up to 4 dynamic signal inputs and 2 speed inputs a1

Our Services

Customer Satisfaction
Please don’t hesitate to contact us if you have any questions or concerns before or after your purchase. We are committed to your 100% satisfaction.
Guarantee & Returns
1. All products we sell are 100% New original Package.in good condition and will be examed before they are shipped. We will try our best to avoid any quality problems.
2. We offer 12 month warranty after receiving parcels. If there are some workmanship or material defects with the products, please contact us firstly, we will exchange it or offer other solutions for you to make a choice.
3. The shipping and handling charge is not refundable and customer should be responsible for all the charges of unreasonable returning and reshipping. All return items must be in good condition. They must under resalable condition. Man-made defects are not guaranteed, such as broken, scratched and so on. Thanks for understanding and cooperation!

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!