vibration
TSI SYSTEM vibration Meggitt Vibro-meter VM600 CPUR2 600-026-000-003 Controller Module

Meggitt Vibro-meter VM600 CPUR2 600-026-000-003 Controller Module

  • product orgin:

    Sweden
  • brand:

    vibration
  • product details


Meggitt Vibro-meter VM600 CPUR2 600-026-000-003 Controller Module


  • The Vibro-Meter® VM600 rack-based monitoring system is part of Meggitt’s solution for the protection and monitoring of rotating machinery used in the power generation and oil & gas industries. The VM600 is recommended when a centralised monitoring system with a medium to large number of measurement points (channels) is required. It is typically used for the monitoring and/or protection of larger machinery such as gas, steam and hydro turbines, and generators,smaller machines such as compressors, fans,motors, pumps and propellers, as well as balanceof-plant (BOP) equipment.
  • A VM600 system consists of a 19" rack, a rack power supply and one or more monitoring card pairs. Optionally, relay cards and rack controller and communications interface cards can also be included.

Picture of 600-026-000-003


Related Product,welcome to inquire:

sales23@htechplc.com /+86 18150137569(whatsapp/wechat)

Ms.kelly stand by to quote you !

RPS6U 200-582-500-013 RPS6U 200-582-500-021
IOC4T 200-560-000-019 IOC4T 200-560-000-111
RLC16 200-570-000-111 RPS6U 200-582-300-013
XIO16T 620-002-000-113 XMV16 620-001-001-116
IOC4T 200-560-000-013 XMV16 620-001-001-116
CPUM 200-595-067-114 RPS6U 200-582-200-021
IOC4T 200-560-000-114 MPC4 200-510-076-114
RPS6U 200-582-200-013 CE680 444-680-000-511
IOC4T 200-560-000-113 IOC16T 200-565-000-012
RPS6U 200-582-200-011 CPUM 200-595-046-114
CA134 144-134-000-612 CA202 144-202-000-106
CPUR2 600-026-000-005 IOCR2 620-022-000-112


Request a free quote

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

related products

CE680 444-680-000-511

Vibro CE680 444-680-000-511 Vibration Sensor

Vibro CE680 444-680-000-511  Vibration Sensor The technical parameters of the CE680 series products usually include the following aspects: 1. Sensor type Type: Accelerometer Measurement range: Typically ±2g to ±50g 2. Frequency response Frequency range: 1 Hz to 10 kHz 3. Sensitivity Sensitivity: Typically between 100 mV/g and 10 mV/g 4. Output1

Vibro-Meter VMU 100 204-100-000-013 Vibration Monitoring Unit

Vibro-Meter VMU 100 204-100-000-013 Vibration Monitoring Unit

Vibro-Meter VMU 100 204-100-000-013 Vibration Monitoring Unit The VMU100 204-100-000-013 is a fully programmable, single-channel accelerometer monitor based on an integrated microprocessor, designed for reliable condition monitoring of rotating machinery. Housed in a rugged IP65-rated enclosure, the unit provides excellent protection against dust a1

MPC4

VIBRO METER MPC4

VIBRO METER MPC4

IOC 4T

VIBRO METER IOC 4T

VIBRO METER  IOC 4T Input / Output Card Type IOC 4T

RLC 16

VIBRO METER RLC 16

VIBRO METER  RLC 16

Vibro Meter VM600 MPC4 200-510-071-113 Machinery Protection Card

Vibro Meter VM600 MPC4 200-510-071-113 Machinery Protection Card

Vibro Meter VM600 MPC4 200-510-071-113 Machinery Protection Card Meggitt Sensing Systems’ Vibro-Meter® VM600 series machinery protection system (MPS) centers on the MPC4 protection card—this thing’s the backbone of the whole setup, and it’s way more flexible than you might expect. It can handle up to 4 dynamic signal inputs and 2 speed inputs a1

Our Services

Customer Satisfaction
Please don’t hesitate to contact us if you have any questions or concerns before or after your purchase. We are committed to your 100% satisfaction.
Guarantee & Returns
1. All products we sell are 100% New original Package.in good condition and will be examed before they are shipped. We will try our best to avoid any quality problems.
2. We offer 12 month warranty after receiving parcels. If there are some workmanship or material defects with the products, please contact us firstly, we will exchange it or offer other solutions for you to make a choice.
3. The shipping and handling charge is not refundable and customer should be responsible for all the charges of unreasonable returning and reshipping. All return items must be in good condition. They must under resalable condition. Man-made defects are not guaranteed, such as broken, scratched and so on. Thanks for understanding and cooperation!

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!