Bently Nevada 3500/15 127610-01 AC/DC POWER SUPPLY
ICS TRIPLEX T8830 Trusted 40 Channel Analogue Input FTA All in stock new original guarantee
Dec 2025 17
2025-07-29
Nov 2024 07
GSI130 244-130-000-204 Galvanic Separation Units Transfer Ratio from Transducer to Processor
Estimated Shipping Size
Dimensions: 5.0" x 2.0" x 4.0"
(12.7 cm x 5.1 cm x 10.2 cm)
Weight: 0 lbs 15.0 oz (0.4kg )
brand:
vibration
GSI130 244-130-000-204 Galvanic Separation Units
Description:
The GSI130 galvanic separation unit is used for supplying transducers and conditioners and for reading off signals given by them.
It is used in 2-wire transmission systems. In a more general application it serves for supplying any electronic system with a consumption of less than 20 mA.
This unit outputs a voltage signal proportional to the current consumed by the conditioner. This voltage signal is directly available for analysis of the conditioner signal.
The GSI130 module avoids any problems due to voltage differences between the measuring point
and the signal processing (e.g. earth loops).
The use of the GSI130 in an installation avoids the need to mount Zener barriers, which generate additional voltages drops and limit the length of the transmission line and the dynamic range of the system.
Vibro CE680 444-680-000-511 Vibration Sensor The technical parameters of the CE680 series products usually include the following aspects: 1. Sensor type Type: Accelerometer Measurement range: Typically ±2g to ±50g 2. Frequency response Frequency range: 1 Hz to 10 kHz 3. Sensitivity Sensitivity: Typically between 100 mV/g and 10 mV/g 4. Output1
VIBRO METER MPC4
VIBRO METER IOC 4T Input / Output Card Type IOC 4T
VIBRO METER RLC 16
Vibro Meter VM600 MPC4 200-510-071-113 Machinery Protection Card Meggitt Sensing Systems’ Vibro-Meter® VM600 series machinery protection system (MPS) centers on the MPC4 protection card—this thing’s the backbone of the whole setup, and it’s way more flexible than you might expect. It can handle up to 4 dynamic signal inputs and 2 speed inputs a1
Vibro Meter S3960 224-124-000-021
Customer Satisfaction
Please don’t hesitate to contact us if you have any questions or concerns before or after your purchase. We are committed to your 100% satisfaction.
Guarantee & Returns
1. All products we sell are 100% New original Package.in good condition and will be examed before they are shipped. We will try our best to avoid any quality problems.
2. We offer 12 month warranty after receiving parcels. If there are some workmanship or material defects with the products, please contact us firstly, we will exchange it or offer other solutions for you to make a choice.
3. The shipping and handling charge is not refundable and customer should be responsible for all the charges of unreasonable returning and reshipping. All return items must be in good condition. They must under resalable condition. Man-made defects are not guaranteed, such as broken, scratched and so on. Thanks for understanding and cooperation!
All products we sell are 100% New original Package in good condition and will be examed before they are shipped.
Room 1904, No.96-2 Lujiang Road, Siming District, Xiamen (Building B of Diamond Coast)
Please read on, stay posted, subscribe, and we welcome you to tell us what you think.
008618150137569
0086 18150137569
sales23@htechplc.com