Bently Nevada 3500/15 127610-01 AC/DC POWER SUPPLY
ICS TRIPLEX T8830 Trusted 40 Channel Analogue Input FTA All in stock new original guarantee
Dec 2025 17
2025-07-29
Nov 2024 07
GE IS200EPSMG2A
Exciter Power Supply Module
The IS200EPSMG2A is a 24V DC power module from the General Electric (GE) EX2100 series. It is designed to provide stable power for industrial automation and power production equipment, and can drive external control boards for flexible system control.
I. Basic Specifications
Input Characteristics
Input Voltage: 24VDC ±10% (Compatible with industrial standard DC power supplies)
Input Current: 5A (maximum continuous load)
Surge Protection: Built-in overvoltage and reverse polarity protection circuits (compliant with IEC61000-4-5)
Output Characteristics
Output Voltage: 5VDC (logic circuit power supply) + 15VDC (driver circuit power supply)
Output Power: 120W (total power, supports multi-channel load sharing)
Ripple and Noise: <50mVpp (at full load)
II. Physical and Environmental Specifications
Mechanical Parameters
Dimensions: 200mm × 100mm × 40mm (compatible with standard 19-inch rack mount design)
Weight: 1.2kg (including heat sink)
Connector Type:
Input: 2-pin Phoenix terminal block
Output: 4 sets of pluggable terminal blocks
Environmental Compatibility
Operating Temperature: -25°C to +70°C (industrial-grade wide temperature design)
Protection level: IP20 (dust and moisture-proof, suitable for installation in control cabinets)
Certification standards: CE, UL508 (Industrial Control Equipment Safety Certification)
III. Features
Power Management
Supports redundant power inputs (requires external switching circuitry)
Built-in load balancing algorithm (dynamically distributes current across multiple outputs)
Protection mechanisms: Overcurrent protection (threshold 6.5A, automatic reset)
Short-circuit protection (response time <10ms)
Overtemperature shutdown (temperature threshold 85°C)
IV. Typical Application Scenarios
GE EX2100 excitation control system: Provides stable power to main control boards (such as EPDM modules)
Industrial automation cabinet: Serves as a distributed power supply module to power PLCs and I/O cards
Power system redundancy: Parallel connection achieves N+1 power redundancy
Related products
IS220YDOAS1A
IS220YAICS1A
IS220YDIAS1A
DS200DCFBG2BNC
IS200ERDDH1A
IS215VCMIH2C
IS220PSVOH1A
IS220PSCAH1A
IS220PDOAH1A
IS200TDBTH2A
IS220PPROH1A
IS220PAICH1A
IS220PDIOH1A
IS220PPRAH1A
GE 531X135PRGALM1 new and original package with one year warranty
GE DS200FSAAG1A Power Regulating Circuit Card
GE DS200SHVMG1A SCR High Voltage Interface Board Basic Attribute: Manufactured by General Electric (GE), this is a high-voltage monitoring and protection board belonging to the Mark V series. Originating from the United States, it serves as a core safety module for gas/steam turbine control systems, specifically designed to integrate seamlessly wit1
GE IS220PPDAH1A PDM Diagnostic Module
GE IS200JPDSGLA PWR DISTRIBUTION CARD
GE IS220UCSAH1A STAND ALONE MODULE GE PROCESSOR BOARD MARK VI 1. Product Classification & Affiliation IS220UCSAH1A is a key printed circuit board (PCB) developed by General Electric (GE), and it belongs to the product lineup of GE’s Mark VIe Turbine Control System—a high-performance, industrial-grade control platform widely used 1
Customer Satisfaction
Please don’t hesitate to contact us if you have any questions or concerns before or after your purchase. We are committed to your 100% satisfaction.
Guarantee & Returns
1. All products we sell are 100% New original Package.in good condition and will be examed before they are shipped. We will try our best to avoid any quality problems.
2. We offer 12 month warranty after receiving parcels. If there are some workmanship or material defects with the products, please contact us firstly, we will exchange it or offer other solutions for you to make a choice.
3. The shipping and handling charge is not refundable and customer should be responsible for all the charges of unreasonable returning and reshipping. All return items must be in good condition. They must under resalable condition. Man-made defects are not guaranteed, such as broken, scratched and so on. Thanks for understanding and cooperation!
All products we sell are 100% New original Package in good condition and will be examed before they are shipped.
Room 1904, No.96-2 Lujiang Road, Siming District, Xiamen (Building B of Diamond Coast)
Please read on, stay posted, subscribe, and we welcome you to tell us what you think.
008618150137569
0086 18150137569
sales23@htechplc.com