Bently Nevada 3500/15 127610-01 AC/DC POWER SUPPLY
ICS TRIPLEX T8830 Trusted 40 Channel Analogue Input FTA All in stock new original guarantee
Dec 2025 17
2025-07-29
Nov 2024 07
| Manufacturer | Vibro Meggitt |
| Series |
EC222 |
| Short Description |
cable assembly |
|
Origin |
US |
|
Signal conditioner |
IPC704 |
|
Length |
From 19.7 in (in steps of 19.7 in) | From 500 mm (in steps of 500 mm) |
|
Temperature range |
−50 to 200 °C |
| Condition |
In Stock New & Original |
| Lead Time |
3-7 days |
|
Warranty |
12 monthes |
| Courier | Fedex/DHL/Your forwarder |
| Payment | T/T Multiple Currency Prepayment acceptable |
| Document | Available |
brand:
vibration
EC222 cable assembly 922-222-000-002
High-quality, high-reliability cable assembly for use with CA280 vibration sensors (accelerometers using external signal conditioners).
For use in harsh environments characterised by high temperatures and/or hazardous areas (potentially explosive atmospheres).
Note: While the EC222 cable assembly and the EC119 cable assembly are similar, the EC222 has less protection and one shield.
Features
High-quality, reliable cable assembly for CA280 vibration systems
K221 low-noise cable with Teflon PFA outer sheath (Ø 4.8 mm)
Threaded connector (CG505 type) to flying leads
2-wire, with shield
Core Parameters
Applicable Sensors: Designed specifically for the CA280 vibration sensor (requires use with an external signal conditioner)
Cable Type: Low-noise twisted-pair shielded cable
Jacket Material: Teflon PFA (high-temperature, corrosion-resistant, and chemically resistant)
Operating Temperature: −50°C to +200°C (peak transients up to +260°C)
Ingress Protection: IP67 (dustproof and waterproof)
Standard Lengths: 1m/3m/5m (custom lengths available)
Connector Type: Gold-plated MIL-C-5015 standard connector (anti-oxidation design)
Electrical Characteristics
1. Impedance Matching
Characteristic Impedance: 100Ω ±10% (suitable for high-frequency vibration signal transmission)
Capacitance Unbalance: <2pF/m (reduces common-mode interference)
2. Shielding Performance
Double-layer shielding: Aluminum foil + tinned copper braid (shielding effectiveness >90dB @ 1GHz)
Grounding Method: Single-ended grounding (at the sensor end)
3. Transmission Characteristics
Maximum Voltage: 300V RMS
Signal Attenuation: <0.1dB/m @ 10kHz (guaranteed signal integrity)
Mechanical Characteristics
Bend Radius: Minimum dynamic bend radius: 6 x cable outer diameter (mobile scenario)
Tensile Strength: Withstands 50N continuous pull (with strain relief)
Oil Resistance: Passes MIL-DTL-83527 fuel immersion test
Vibration Resistance: Complies with IEC 60068-2-6 (10-2000Hz, 15g acceleration)
Frequently Inquired model：
144-280-000-215
144-280-000-125
144-280-000-015
Related :
TQ401 EA401
| Relevant Products we have | Model | PN |
| Racks | ABE04x | |
| Racks | ABE056 | |
| Analog monitoring card pair | AMC8 and IOC8T | |
| Calibrator Module | ACM215 | 204-215-000-101 |
| Acceleration Sensor | AS-022/050 | |
| Piezoelectric accelerometer | CA202 |
144-202-000-203 144-202-000-105 144-202-000-203 144-202-000-205 |
|
Piezoelectric accelerometer with integrated electronics |
CE134 CE310 CE620 CE110 |
444-134-000-145 444-620-000-011-A1-B100-C01 444-620-000-011-A2-B100 110-100-CT-VO-S 110-100-CT-VO |
| Piezoelectric pressure transducer |
CP232 CP237 CP502 CP104 |
143-232-000-222 143-502-000-021 143-502-000-031 143-502-000-041 143-502-000-051 143-502-000-061 143-104-000-101 |
| CPU card and input/output card. | CPUM and IOCN |
209-595-067-121 209-595-031-111 200-566-000-111 200-566-000-012 |
|
Rack controller and communications interface card pair. |
CPUR and IOCR | |
|
Rack controller and communications interface card pair. |
CPUR2 and IOCR2 | 600-026-000-002 |
| Velocity transducer | CV213 | 110-213-000-012 |
| Extension cable |
EA401 EA402 EA403 EA902 |
913-403-000-012 913-402-000-013 913-902-000-011 |
|
Accessory of EW140 and DIC413 ice-detection system for gas turbines |
EC119 EC222 |
922-222-000-002 |
| cable assembly | EC175 | |
| cable assembly | EE139 | |
| ice-detection sensor | EW140 | |
| Galvanic Isolation Unit | GSI130 | |
| Input/Output card | IOC16T | 200-565-000-013 |
| Input/output card for the CPUR2 | IOC-R2 | 620-022-000-112 |
| Intelligent relay card | IRC4 | 601-001-001-003 |
| Signal conditioner | IPC704 |
244-704-000-042 IPC704 244-704-000-511 |
| Signal conditioner | IQS450 IQS452 |
204-450-000-001 204-450-000-002 204-452-000-011 204-452-000-211 |
| Signal conditioner | IQS900 | 204-900-000-011 |
| Machinery protection card | MPC4 |
200-510-150-011 200-510-041-022 200-510-150-031 200-510-070-113 200-510-078-115 |
| Machinery protection card | MPC4G2 and IOC4G2 | |
| Level Detector&Digital Display Module | PLD772 | 254-772-000-224 |
| Rack power supplies | RPS6U |
200-582-200-021 200-582-300-013 200-582-500-013 200-582-500-021 200-582-600-013（DC） |
| Relay card | RLC16 | |
| Proximity sensor |
TQ401 TQ402 TQ403 TQ412 TQ422 |
111-401-000-013 111-402-000-012 111-402-000-013 111-403-000-013 111-412-000-012 111-412-000-013 111-422-000-01 |
| Transmitter | TSW101M1 VMD-TSW101-M1-001-X007-Y02-H10 | |
| Tracking Filter | TFM677 | 204-677-000-003 |
| Condition monitoring card pairs | XMx16 and XIO16T | 620-002-000-113 |
| Condition monitoring module | XMV16 | 620-001-001-116 |
All VM products should be available in our expanded inventory, welcome to inquire:
sales23@htechplc.com
Kelly wang
+86 18150137569
Vibro CE680 444-680-000-511 Vibration Sensor The technical parameters of the CE680 series products usually include the following aspects: 1. Sensor type Type: Accelerometer Measurement range: Typically ±2g to ±50g 2. Frequency response Frequency range: 1 Hz to 10 kHz 3. Sensitivity Sensitivity: Typically between 100 mV/g and 10 mV/g 4. Output1
VIBRO METER MPC4
VIBRO METER IOC 4T Input / Output Card Type IOC 4T
VIBRO METER RLC 16
Vibro Meter VM600 MPC4 200-510-071-113 Machinery Protection Card Meggitt Sensing Systems’ Vibro-Meter® VM600 series machinery protection system (MPS) centers on the MPC4 protection card—this thing’s the backbone of the whole setup, and it’s way more flexible than you might expect. It can handle up to 4 dynamic signal inputs and 2 speed inputs a1
Vibro Meter S3960 224-124-000-021
Customer Satisfaction
Please don’t hesitate to contact us if you have any questions or concerns before or after your purchase. We are committed to your 100% satisfaction.
Guarantee & Returns
1. All products we sell are 100% New original Package.in good condition and will be examed before they are shipped. We will try our best to avoid any quality problems.
2. We offer 12 month warranty after receiving parcels. If there are some workmanship or material defects with the products, please contact us firstly, we will exchange it or offer other solutions for you to make a choice.
3. The shipping and handling charge is not refundable and customer should be responsible for all the charges of unreasonable returning and reshipping. All return items must be in good condition. They must under resalable condition. Man-made defects are not guaranteed, such as broken, scratched and so on. Thanks for understanding and cooperation!
All products we sell are 100% New original Package in good condition and will be examed before they are shipped.
Room 1904, No.96-2 Lujiang Road, Siming District, Xiamen (Building B of Diamond Coast)
Please read on, stay posted, subscribe, and we welcome you to tell us what you think.
008618150137569
0086 18150137569
sales23@htechplc.com